Shalof, M., Afife, A., Abd-Elaziz, M., Alsebaey, R., Al-Deeb, A. (2024). Combining Ability Using Half Diallel Mating Design of Yellow Maize Inbred Lines. Journal of the Advances in Agricultural Researches, 29(3), 506-512. doi: 10.21608/jalexu.2024.304994.1207
M. S. Shalof; A.A. M. Afife; M. A.A. Abd-Elaziz; R. H.A. Alsebaey; A. S.M. Al-Deeb. "Combining Ability Using Half Diallel Mating Design of Yellow Maize Inbred Lines". Journal of the Advances in Agricultural Researches, 29, 3, 2024, 506-512. doi: 10.21608/jalexu.2024.304994.1207
Shalof, M., Afife, A., Abd-Elaziz, M., Alsebaey, R., Al-Deeb, A. (2024). 'Combining Ability Using Half Diallel Mating Design of Yellow Maize Inbred Lines', Journal of the Advances in Agricultural Researches, 29(3), pp. 506-512. doi: 10.21608/jalexu.2024.304994.1207
Shalof, M., Afife, A., Abd-Elaziz, M., Alsebaey, R., Al-Deeb, A. Combining Ability Using Half Diallel Mating Design of Yellow Maize Inbred Lines. Journal of the Advances in Agricultural Researches, 2024; 29(3): 506-512. doi: 10.21608/jalexu.2024.304994.1207
Combining Ability Using Half Diallel Mating Design of Yellow Maize Inbred Lines
Maize Research Department, Field Crops Research Institute, ARC, Egypt
Abstract
Combining abilities is prerequisite to developing good maize hybrids. A half diallel cross among seven new yellow maize inbred lines were made in 2022 summer growing season. The resulting, 21 F1 crosses along with two yellow commercial hybrids, SC.168 and SC. 3444 were evaluated in a randomized complete block design with three replications at three locations in 2023 summer growing season. To study the combining ability to identify the most superior inbred lines and hybrids. Data recorded on days to 50% silking, plant and ear heights and grain yield. Results indicated that Both GCA and SCA mean squares were highly significant indicating the involvement of both additive and non-additive type of gene effects in the inheritance of all traits under study. However, the additive gene effects played the major role in the inheritance of all traits except for days to 50 %silking. The best inbred line for GCA effects were Gm.20 for earliness, Gm.6041 for short plant and ear heights, Gm.45 for grain yield. The best cross for SCA effects was (Gm.6041 × Gm.67) for earliness, (Gm.67 × Gm.34) for short plant height (cm), (Gm.6052 × Gm.20) for short ear height (cm) and (Gm.45× Gm.67) for high grain yield. These crosses will be evaluated to extensive testing in maize breeding program.
For increasing maize (Zea mayse L.) production must be developing hybrids to give high yields. The gen action natural is helpful for plant breeders to give new hybrids through the involvement of different quantitative characteristics. General combining ability (GCA) and specific combining ability (SCA) are the two components of combining ability which important in determining the inheritance pattern of desired traits Sprague and Tatum, (1942). Information on GCA enabled us to explore and detect the variability of breeding materials to determine desirable inbreed lines Vacaro et al. (2002) and Sharma et al. (2016). While SCA helps in determining heterotic patterns of inbred lines, indicating promising candidates for single crosses and clustering inbred lines into heterotic groups, Abrha et al. (2013). So, in breeding programs must be knowledge of gene action magnitude to select promising and efficient genotypes through combining ability analysis of both additive and non-additive gene effects, have been reported by Rojas and Sprague (1952), Moll et al. (1962), Mason and Zuber (1976). On the other hand, Gamble (1962) and Kambe et al. (2013) stated that the exploitation of hybrid vigor and selection of parents based on combining ability has been used as an important breeding approach in crop improvement. This Present study was undertaken to investigate the breeding behavior of seven maize inbred lines for days numbers to mid-silking, plant, ear height and grain yield to identify the superior hybrid yield, compared with two commercial hybrids.
MATERIALS AND METHODS
The experimental materials, comprising of seven yellow inbred lines viz; Gm.6041, Gm.6052, Gm.45, Gm.56, Gm.20, Gm.67 and Gm.34 produced in maize breeding program at Gemmeiza Station. These seven inbred lines were crossed in half diallel mating design to develop 21 crosses. The 21 F1 hybrids plus two yellow commercial check single crosses, SC.168 and pioneer SC. 3444 were evaluated in a randomized complete block design with three replications at three locations Gemmeiza, Nubaria and Mallawy in summer growing season. Data recorded on grain yield after 120 days from sowing (ard/fed) adjusted on 15.5% grain moisture, days to 50% silking (days number from sowing to appear 50% of silks) ,Plant height was measured in (cm) from ground surface to flag leaf and Ear height was measured in (cm) from ground surface to ear leaf. Analysis of variances was carried out for all the traits according to Snedecor and Cochran (1989) technique. Highly significant differences were noticed for crosses for all traits, hence the analyses of GCA and SCA were carried out using Griffing, (1956) technique, Method 4 model 1. Calculation of analysis of variances was carried out by using computer application of statistical analysis system (SAS 2008).
Table (1): The name of inbred lines and pedigree in this investigate.
Code
Line name
Pedigree
P1
Gm. 6041
Gm.Y. Pop.
P2
Gm. 6052
Gm 509 F.
P3
Gm. 45
Comp #45.
P4
Gm. 56
Comp #45.
P5
Gm. 20
Nub.Y. Pop.
P6
Gm. 67
Nub.Y. Pop.
P7
Gm. 34
Bank material.
RESULTS AND DISCUSSION
Analysis of variances
Analysis of variances for four traits across three locations is presented in Table (2). Results showed that significant differences between the three locations (Loc) were detected for all studied traits, indicating that the three locations were differed in their environmental conditions. The mean squares of the interaction between crosses and locations (C x Loc) were highly significant for all studied traits, meaning that the crosses were affected by changing locations. These findings agreed with those reported by Aly and Amer (2008), Mousa and Aly (2012), Sultan et al. ( 2012), Kumar et al. (2017), Hammadi and Abed (2018), Rohman et al. (2019), Alam et al. (2020), Abdulla, et al. (2022), Suwarno et al. (2023) and Vishal et al. (2024).
Table (2): Mean Squares of locations, crosses, and their interaction for days to 50 % silking (SK), plant height (PH), ear height (EH) and grain yield (GY).
SOV
d.f
SK
PH
EH
GY
Location (Loc)
2
280.91**
52633.41**
33883.11**
266.74**
Rep / Loc
6
4.76
321.70
246.18
175.73
Crosses (C)
20
12.64**
1818.22**
854.89**
212.95**
C × Loc
40
23.68**
896.15**
427.96**
116.41**
Error
120
1.34
134.39
77.77
8.84
** Highly significant different at 0.01 level of probability.
Both GCA and SCA mean squares at (Table 3), were highly significant variances indicating the involvement of both additive and non-additive type of gene action in the inheritance of these traits. Similar findings have been reported by Moll et al.(1962), Mason and Zuber (1976), Saad et al. (2004), Sharma et al. (2004), Muraya et al. (2006), Sultan et al. (2012), Hammadi and Abed (2018), Rohman et al. (2019), Alam et al. (2020), Abdulla et al. (2022), Suwarno et al. (2023) and Vishal et al. (2024). The interactions between GCA and SCA with locations (Loc) were highly significant for all studied traits, indicating that both additive and non-additive gene effects were influenced by locations. The ratio of GCA/SCA was more than unity for all studied traits except for, days to 50% silking. These results indicated that the additive gene effects were more important and played the major role in the inheritance of all studied traits except for days to 50% silking (the non-additive gene effects was played the major role). These results agree with the finding of Hammadi and Abed (2018), Rohman et al. (2019), Suwarno et al.( 2023) and Vishal et al. (2024). Meanwhile, the ratio of (GCA × Loc / SCA × Loc) was more than unity for all studied traits except for grain yield indicating the additive gene effects was more affected by locations for traits (SK, PH and EH) meanwhile the reverse was obtained for grain yield, which the non-additive gene effects was more influence by locations.
Table (3): Mean squares of GCA, SCA and their interaction with locations (Loc) for days to 50 % silking (SK), plant height (PH), ear height (EH) and grain yield (GY).
SOV
df
SK
PH
EH
GY
GCA
6
10.04**
4310.47**
2035.13**
422.13**
SCA
14
13.76**
750.013**
347.08**
123.31**
GCA × Loc
12
32.19**
1447.58**
734.99**
78.95**
SCA × Loc
28
20.04**
659.87**
296.73**
132.46**
Error
120
1.34
134.39
77.77
8.84
GCA / SCA
0.73
5.74
5.83
3.42
GCA × Loc / SCA × Loc
1.61
2.19
2.45
0.60
** Highly significant differences at 0.01 level of probability.
Mean performance
Mean performance for 21 F1 and two checks (SC 168 and SC 3444) across three locations for grain yield and other agronomic traits are presented in Table 4. For days to 50% silking, crosses ranged from 59 days for (Gm 6041 x Gm 67) to 64 days for (Gm 6041 x Gm 34). Out of 21 crosses; 6 crosses were significantly earlier than the best check SC 168 and 15 crosses were significantly earlier than the check SC 3444 the best crosses from them were (Gm 6041 × Gm 67), (Gm 6041 × Gm 6052), (Gm 6052 × Gm 20), (Gm 45 × Gm 56), (Gm 45 × Gm 20) and (Gm 20 × Gm 67). For plant height, 15 crosses out of the evaluated 21new yellow single crosses were significantly shorter than the checks SC 168 and SC 3444. For ear height, 16 crosses out of the same evaluated 21 crosses were significantly lower ear placement than the check SC168 and 7 crosses than the check SC 3444. The best hybrid for short plant height and lower ear placement was the single cross (Gm 6041 × Gm 34) and (Gm 6041 × Gm 56). The highest grain yield was obtained from crosses (Gm.6052 × Gm.45) 33.09 ard/fed followed (Gm.45 × Gm.67) 32.80 ard/fed, these two crosses were significantly out yielded the check SC 168 (29.08 ard/fed) and non-significant than check SC 3444 (30.55 ard/fed). Hence it could be concluded that these two crosses may be useful for improving grain yield in maize breeding program.
Table (4): Mean Performance of 21 crosses and two checks for days to 50 % silking (SK), plant height (PH), ear height (EH) and grain yield (GY) across three locations
Cross
SK
(days)
PH
(cm)
EH
(cm)
GY
(ard/fed)
(Gm.6041 × Gm.6052)
60
226.0
120.4
29.07
(Gm.6041 × Gm.45)
62
215.0
115.7
24.09
(Gm.6041 × Gm.56)
61
206.8
111.6
26.16
(Gm.6041 × Gm.20)
61
226.3
124.0
26.49
(Gm.6041 × Gm.67)
59
228.7
122.2
19.44
(Gm.6041 × Gm.34)
64
201.6
106.1
14.66
(Gm.6052 × Gm.45)
61
248.7
142.7
33.09
(Gm.6052 × Gm.56)
63
250.4
141.3
28.83
(Gm.6052 × Gm.20)
60
245.9
127.6
25.88
(Gm.6052 × Gm.67)
62
251.2
135.3
25.96
(Gm.6052 × Gm.34)
61
243.1
131.1
24.81
(Gm. 45 × Gm.56)
60
224.9
135.4
28.57
(Gm.45 × Gm.20)
60
236.3
137.7
24.17
(Gm.45 × Gm.67)
62
223.2
124.4
32.80
(Gm.45 × Gm.34)
61
243.9
140.1
25.06
(Gm.56 × Gm.20)
61
226.1
129.3
22.34
(Gm.56 × Gm.67)
61
218.8
123.2
27.64
(Gm.56 × Gm.34)
61
231.7
128.2
27.29
(Gm.20 × Gm.67)
60
231.8
121.0
26.05
(Gm.20 × Gm.34)
61
224.4
126.9
21.27
(Gm.67 × Gm.34)
62
212.1
119.0
13.85
SC.168
62
251.3
142.8
29.08
SC. 3444
63
247.1
131.9
30.55
LSD
5%
1.1
10.9
8.3
2.79
1%
1.4
14.1
10.7
3.618
General combining ability (GCA) effects:
Estimates GCA effects for seven inbred lines for traits under study are shown in Table 5. For days to 50% silking, the parental inbred line (Gm 20) showed negative and significant GCA effects (desirable). Whereas, (Gm.6041) and (Gm.34) exhibited negative and significant GCA effects (desirable) for plant height also (Gm 6041) and (Gm 67) exhibited negative and significant GCA effects (desirable) for ear height. The parental inbred lines (Gm.6052), (Gm.45) and (Gm 56) were good combiner for grain yield (positive and highly significant). From above results the desirable inbred lines for traits under study could be used for develop superior hybrids for these traits. Researchers which conformed with these results Sultan et al. (2012), Hammadi and Abed (2018), Rohman et al. (2019), Alam et al. (2020),Abdulla, et al. (2022), Suwarno et al. (2023) and Vishal et al. (2024).
Table (5): GCA effects of seven inbreed lines for days to 50 % silking (SK), plant height (PH), ear height (EH) and grain yield (GY) across three locations
Inbred line
SK
PH
EH
GY
Gm.6041
0.089
-14.38**
-12.19**
-2.16**
Gm.6052
-0.022
17.81**
7.50**
3.38**
Gm.45
-0.244
3.14
7.01**
3.41**
Gm.56
-0.022
-3.51*
1.63
2.02**
Gm.20
-0.622**
2.92
1.10
-0.90*
Gm.67
-0.111
-2.09
-3.15**
-0.99*
Gm.34
0.933**
-3.89*
-1.90
-4.75**
LSD gi
5%
0.318
3.18
2.42
0.81
1%
0.412
4.12
3.14
1.05
*, ** significant and highly significant differences at 0.05 and 0.01 level of probability, respecttively.
Specific combining ability (SCA) effects:
Table (6), displayed significant negative and positive SCA effects for SK, PH, EH and GY traits in combined data. For days to 50% sillking, the desirable hybrids for (SCA) effects were (Gm 6041×Gm 6052), (Gm 6041×Gm 67), (Gm 6052×Gm 34), (Gm 45×Gm 56) and (Gm 56×Gm 34). For plant heights, the desirable hybrids for (SCA) effects were (Gm 6041×Gm 6052), (Gm 6041×Gm 34), (Gm 45×Gm 67) and (Gm 67×Gm 34). For ear heights, results the desirable hybrids for SCA effects were (Gm 6041×Gm 6052), (Gm 6041×Gm 34), (Gm 6052×Gm 20) and (Gm 45×Gm 67). For grain yield results showed positive and significant SCA effect were detected for crosses (Gm 6041×Gm 6052), (Gm 6041 × Gm 20), (Gm 45 × Gm 67), (Gm 56 × Gm 34), (Gm 20 × Gm 67) and (Gm 20 × Gm 34) towards high grain yield. Similar results were obtained by Muraya et al. (2006), Sultan et al. (2012), Hammadi and Abed (2018), Rohman et al. (2019), Suwarno et al. (2023) and Vishal et al. (2024).
Table (6): SCA effects of 21 crosses for days to 50% silking (SK), plant height (PH), ear height (EH) and grain yield (GY), across three location.
Crosses
SK
PH
EH
GY
(Gm.6041 × Gm.6052)
-1.326**
-6.80*
-1.69
2.72**
(Gm.6041 × Gm.45)
0.563
-3.14
-5.98*
-2.27**
(Gm.6041 × Gm.56)
-0.437
-4.69
-4.71
1.18
(Gm.6041 × Gm.20)
0.719*
8.41**
8.27**
4.437**
(Gm.6041 × Gm.67)
-1.793**
15.77**
10.73**
-2.52**
(Gm.6041 × Gm.34)
2.274**
-9.54**
-6.62**
-3.54**
(Gm.6052 × Gm.45)
-0.215
-1.67
1.33
1.17
(Gm.6052 × Gm.56)
2.119**
6.77*
5.38*
-1.69*
(Gm.6052 × Gm.20)
-0.504
-4.22
-7.87**
-1.72*
(Gm.6052 × Gm.67)
0.541
6.12
4.16
-1.54
(Gm.6052 × Gm.34)
-0.615*
-0.185
-1.31
1.06
(Gm. 45 × Gm.56)
-0.770*
-4.11
-0.02
-1.98*
(Gm.45 × Gm.20)
-0.281
0.88
2.73
-3.45**
(Gm.45 × Gm.67)
1.096**
-7.20*
-6.24**
5.26**
(Gm.45 × Gm.34)
-0.393
15.25**
8.18**
1.28
(Gm.56 × Gm.20)
0.496
-2.67
-0.22
-3.89**
(Gm.56 × Gm.67)
0.096
-4.98
-2.09
1.49
(Gm.56 × Gm.34)
-1.504**
9.70**
1.67
4.90**
(Gm.20 × Gm.67)
-0.304
1.57
-3.78
2.83**
(Gm.20 × Gm.34)
-0.126
-3.96
0.87
1.81*
(Gm.67 × Gm.34)
0.363
-11.27**
-2.78
-5.51**
LSD SIJ
5%
0.627
6.27
4.78
1.61
1%
0.813
8.14
6.19
2.08
*, ** significant and highly significant differences at 0.05 and 0.01 level of probability, respectively.
CONCLUSION
Additive gene effects played the major role in the inheritance of most study traits. Among the evaluated inbred lines, inbreeds Gm.6052, Gm.45 and Gm.56 significantly contributed to the good performance of the hybrids for grain yield characteristics. Amongst 21 crosses only two crosses (Gm.6052×Gm.45 and Gm.45×Gm.67) positive better results over check varieties SC.168 for grain yield. Therefore, it is suggested that these single crosses may be useful for improving maize grain yield program.
References
Abdulla, S. S. M., D. A. Abdulkhaliq and Sh. I. Towfiq; (2022). Partial diallel analysis of maize inbred lines for kernels yield and its components in Sulaimani-Iraq. Iraqi J. of Agric. Sci. 53:1190- 1202.
Abrha, S. W., H. Z. Utta and D. Wegary (2013). Line x tester analysis of maize inbred lines for grain yield and yield related traits. Asian Journal of Plant Science and Research, 3(5):12-19.
Alam, M. I., S.K. Sinha, R. E. Ekka and D. Thakur (2020). Combining Ability analysis using diallel mating design in inbred lines of maize (Zea mays L.). Int. J. Curr. Microbiol. App. Sc. Special Issue-10: 445-456.
Aly, R.S.H. and E.A. Amer (2008). Combining ability and type of gene action for grain yield and some other traits using line × tester analysis in newly yellow maize inbred lines (Zea mays L.). J. of Agric. Sci. 33: 4993-5003.
Gamble, E.E. (1962). Gene effects in corn (Zea mays L.) separation and relative importance of gene effects for yield. Canadian J. of P. Sci. 12: 339 -348.
Griffing, B. (1956). Concept of general and specific combining ability in relation to diallel crossing systems. Aust. J. of Biol. Sci. 9: 463-493.
Hammadi H. J. and A. A. Abed, (2018). Determination heterosis, combining ability and gene action using half diallel crosses in maize. Iraqi J. of Agric. Sci., :49(6): 454 – 459.
Kambe, G.R., U. Kage, L. Chandapa, B.G. Shekara and D. Shobha (2013). Combining ability studies in maize (Zea mays L.). Molecular plant breeding.4 (14):116-127.
Kumar, A., A. Dadheech, N. Kiran, P. Bisen and S. Kumar, (2017). Diallel analysis of combining ability for yield and yield contributing traits over the environments in maize (Zea mays L.). Int. J. Curr. Micro. App. Sci 6(10): 196-208.
Lahane G.R., J.M. Patel and R.M. Chauhan, (2015). Estimation of combining ability and heterosis for quantitative traits in maize (Zea mays L.) using diallel approach. India Agric. Sci. Digest., 35 (4) 2015: 269-274.
Mason, L. and S.M. Zuber (1976). Diallel analysis of maize for leaf angle, leaf area, yield and yield components. Crop Sci. 21: 78-79.
Moll, R. H., K. Kojima and H.F. Robinson (1962). Components of yield and over dominance in corn. Crop Sci. 21: 78-79
Mousa, S. Th. M. and R.S.H. Aly (2012). Estimation of combining ability effects of new white maize inbred lines (Zea mays L.) via line x tester analysis. Fourth Field Crops Conference "Field Crops Facing Future Challenges". Egy. J. Agric. Res. 90(4):77-90.
Muraya M.M., C.M. Ndirangu and E.O. Omolo (2006). Heterosis and combining ability in diallel crosses involving maize (Zea mays L.) S1 lines. Australian J. Exp. Agri. 46(3): 387-394.
Rohman, Md. M., M. G. Hossain, S. H. Omy, N. J. Methela and Md. R. Molla,(2019). Evaluation of diallel crosses of maize at multilocation (Zea mays L.) for saline tolerance. J. of Cereals and Oilseeds 10: 29-42.
Rojas, B.A. and G.F. Sprague (1952). A comparison of variance in corn yield trails. III. General and specific combining ability and their interaction with locations and years. Agron. J. 44: 462-466.
Saad, I. M., H.N. Malik, N. M. Minhas, and M. Munir (2004). General and specific combining ability studies in maize diallel crosses. Int. J. Agriculture and Biology. 6(5): 856-859.
SAS (2008). The SAS system. Version 8. Online Doc. HTMI. Format, SAS Institute, Cary.NC., USA.
Sharma, P., M. S. Punia and M. C. Kamboj (2016). Gene effects and combining ability for yield and quality traits in maize (Zea mays L.). Res. Crops, 17 :723-728.
Sharma, S., R. Narwal, M. S. Kumar and S. Dass (2004). Line x tester analysis in maize (Zea mays L.). Forage Research, 30: 28-30.
Snedecor, G.W. and W.G. Cochran, (1989). Statistical Methods. 8th Edition, Iowa State University Press, Ames.
Sparague, G. F. and L. A. Tatum (1942). General vs. specific combining ability in single crosses of corn. J. Amer.Soc. Agron. 34: 923–932.
Sultan, M.S.; S.E. Sadek; M.A. Abdel-Moneam and M.S. Shalof, (2012). Combining ability for yield and other agronomic traits in diallel crosses of six new yellow maize inbred lines. J. P. Prod., Mans. Univ., 3(6): 1089 – 1099.
Suwarno A. M., A. Qadir, A. K. Wijaya A and W. B. Suwarno, (2023). Agronomic performance of IPB maize hybrids and combining ability of the lines. J. of Trop. Crop Sci. 10(2): 144-151.
Vishal V., M. Biswal, N.K. Yadav and G.S. Gathiy, (2024). Exploration of diallel method for assessing heterosis and combining ability in maize (Zea mays L.). Inter. J. of Plant and Soil Sci. 35 (24): 218-234.